XANSYS Forum Index
    Register    

FAQ    Search    Memberlist    Usergroups    SmartFeedSmartFeed    Profile    Log in
Problem with Model between Ansys 11 and 15 (APDL)
 
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    XANSYS Forum Index -> XANSYS
Author Message
maha.moddather.hassan
User


Joined: 15 Jun 2015
Posts: 1

PostPosted: Mon Sep 21, 2015 10:09 am  Reply with quote

Hi,
I have the following simple model determining the plate buckling load. It has been running without a problem in ANSYS apdl 11; however, when using Ansys 15, a message showing that the model is not constrained appears. The model is constrained only in the Z direction and the first buckling mode is neglected. Is there a reason for this?
/FILNAM, MODEL1
/TITLE, C, SOLID PLATE
WPSTYLE,,,,,,,,0
/PREP7
!PARAMETERS
!UNITS , N, MM
T=10 !THICKNESS OF PLATE
W=1000 !WIDTH OF PLATE
D=1000 !DEPTH OF PLATE
OPH= 300 !DIAMETER OF OPENING
OPX= 400 !DISTANCE OF IN X TILL CENTER OF OPENING
OPY= 500 !DISTANCE OF IN Y TILL CENTER OF OPENING
!ELEMENT TYPE
ET,1,SHELL63
!REAL CONSTANT
R,1,T, , , , , ,
!MATERIAL PROPERTIES
! STEEL MATERIAL
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,210000
MPDATA,PRXY,1,,0.3
!GEOMETRY
RECTNG,0,W,0,D,
CYL4,OPX,OPY,OPH/2
ASBA,1,2
!MESHING
LSEL,S,LINE,,2
LSEL,A,LINE,,4
LESIZE,ALL, , ,32, , , , ,1
LSEL,S,LINE,,1
LSEL,A,LINE,,3
LESIZE,ALL, , ,32, , , , ,1
LSEL,S,LINE,,5,8,1
LESIZE,ALL, , ,16, , , , ,1
MSHAPE,0,2D
MSHKEY,2
AMESH,ALL
FINISH
/SOL
! DEFINING DEGREES OF FREEDOM
LSEL,S,LINE,,1,4,1
DL,ALL,1,UZ,0

! DEFINING PRESSURE ON LINES
LSEL,S,LINE,,2
LSEL,A,LINE,,4
SFL,ALL,PRES,1,

ALLSEL,ALL
! SOLUTION CONTROL: FIRST ANALYSIS STAGE
ANTYPE,0
PSTRES,1
/STATUS,SOLU
SOLVE
FINISH
/SOLUTION
ANTYPE,1
BUCOPT,SUBSP,2,0,0 !NUMBER OF CONSIDERED MODES = 2
SUBOPT,0,0,0,0,0,ALL
MXPAND,2,0,0,1,0.001, !NUMBER OF CONSIDERED MODES = 2
/STATUS,SOLU
SOLVE
FINISH

Thanks a lot for your help.
Regards,
Maha Hassan
CUFE
Back to top
View user's profile Send private message
Display posts from previous:   
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    XANSYS Forum Index -> XANSYS
All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group

sleek template created by Andrew Charron