jorge.ceballos
User
Joined: 03 Jun 2015
Posts: 5
|
 Posted: Fri Nov 20, 2015 10:02 am |
 |
|
Hello,
I have a line body, which it has been done automatically with elements BEAM188. This element use Timoshenko theory. For my calculation I would like to use using the Navier-Euler-Bernoulli models, that can be activated with setting the Keyopt 2 to 1.
I have tried in two ways to set this value, but non is working .
First: I wrote following commands in the geometry
| Code: |
et,matid,beam188
keyopt,matid,2,1
sectype,matid,beam,ctube
secdata,422,432,20
|
Second one I inset the code at the static structural
| Code: |
/prep7
*get,emax,etyp,,num,max
emax=emax+1
et,emax,beam188
keyopt,beam188,2,1
sectype,emax,beam,ctube
secdata,422,432,120
cmsel,s,koerper
emodif,all,type,emax
emodif,all,secnum,emax
alls
finish
/solu
|
Does someone know how to do this correctly?
Cheers,
_________________
Jorge Ceballos Velasco
Project Engineer
GSI Helmholtzzentrum für Schwerionen Forschung GmbH
Darmstadt (Germany)
Tel: +49 6159 711488
E-mail: j.ceballosvelasco@gsi.de |
|
SmartFeed
