Joined: 09 Oct 2013
|Posted: Sun Feb 05, 2017 11:29 pm
|Hi guys. I've made a really basic layup with a single ply meshed with shells (following ANSYS tutorials). I want to export it to LS-Dyna and have set up everything in "Explicit Dynamics (LS-Dyna Export)" in WB from ACP (Pre). Unfortunately, I get the error message "Layered section is not allowed in the current analysis"m and there's a question mark by the Explicit Dynamics cell. However, a basic Static Structural analysis completes just fine with the layup.
Can anyone advise me how to get the layup into LS-Dyna as a .k file? Google searches on that error turn up 0 results, although ANSYS does claim that it should be possible to export from WB to LS-Dyna....
Graduate Research Assistant
Mechanical Engineering Department